---

Body-in-White -"ROLLER"

  Cheetah Evolution Body-in-White base package

---

• Frame – 1 ½” round tube DOM, 1 1/2” square tube, 14 Ga. Sheet steel Mono-coque chassis. All suspension mounts, harness mounts, fuel tank mounts, steering mounts, etc.   TIG welded round joints.  
• Restored GM/Alcoa aluminum front steering knuckles, lower control arms.
• Manufactured upper control arms – fully adjustable.
• Restored GM/Alcoa aluminum rear bearing supports.
• Restored GM outer axle shafts. Black oxide plated.
• New front and rear wheel bearings.
• New upper and lower ball joints.
• New power rack and pinion.
• New steering column with tilt, turn signals, hazards, can be fitted with a removable hub and  wheel.
• New steering shafts, u-joints and supports.
• New adjustable strut rods.
• New rear toe control.
• Custom trailing arms.
• Custom rear shock push rods.
• Custom cantilever shock mechanisms.
• QA-1 coilover shocks and springs, 350 front, 400 rear.
• Custom AFCO radiator and radiator mounts. Derale or Spal fan and shroud.
• Stainless steel engine mounts with poly bushings.  Mount to side of block. Provided for SBC, BBC or LS series engines.
• Custom alloy fuel tank with quick fill and Monza style cap on body (17  US gal.)
• AN braided fuel line, return line, vent line.
• Wilwood 3 pedal assembly – custom throttle mount for GM style drive-by-wire if using LS engine.
• Wilwood master cylinders and reservoirs.  Fittings, stop light switch, flex lines to bulkhead installed.
• Stainless Steel brake lines. Flex lines at each wheel.
• Winter’s Performance Products Championship Independent 10” ring gear differential with 4.10:1 ratio and Track-diff posi (non-quickchange).
• New custom steel halfshafts with sealed u-joints.
• New custom ‘H’- yoke drive shaft with slip yoke and trans mount for Tremec T-56 Magnum 6-speed transmission.
• Wilwood 6 piston front calipers and drilled and slotted rotors. (red, black or silver).
• Wilwood 4 piston rear calipers and drilled and slotted rotors. Wilwood electric parking brake caliper complete with wiring harness and E-brake button. (red, black or silver). Wilwood CNC alloy caliper mounts.
• Front DOT laminated front windshield installed with weatherstrip.
• Rear smoked optically clear acrylic window installed with weatherstrip.
• Hand laid fiberglass body.
• Hand laid fiberglass bonnet (hood).
• Inner spars bonded to hood. Hood is hinged to chassis with gas rods installed.
• Rear inner wheel tubs are bonded into main body.
• Inner door step plates are bonded into main body.
• Fiberglass dash trimmed and installed.
• Inner door is trimmed to fit main body and mounted with CNC alloy gull-wing hinges to rollcage.  Gas rods installed for doors.
• Outer doors are provided but not trimmed or bonded to inner doors. (for installation of latches by client).
• Two Kirkey alloy vintage bucket seats with custom seat mounts and installed in car.
• Side pipes, 3 bolt header flange

 

 Base price - $65,000

• Any additions or substitutions will change price.
•  Any body modifications, fiberglass work will change price.
•  Body is mounted and shipped in gelcoat.
• All suspension, steering, mounting hardware is grade 8 or metric 12.9
• All threads are fine and nylocks are used.  

Upon request at additional cost:

• Frame -  blasted, epoxy primed and painted single stage color of choice.
• Bearing supports - blasted, epoxy primed and painted single stage color of choice.
• GM/Alcoa aluminum front steering knuckles - blasted, epoxy primed and painted single stage color of choice.  

cheetah slot car, cox cheetah, 1/32 cheetah, 1/24 cheetah, cheetah hot wheel, cheetah evolution, eaa, experimental aircraft association, cheetah for sale, kit car for sale, cheetah kit for sale, chevy cheetah for sale