2020 Cheetah Evolution Body-in-White base package
- Frame – 1 ½” round tube DOM, 1 1/2” square tube, 14 Ga. Sheet steel Mono-coque chassis. All suspension mounts, harness mounts, fuel tank mounts, steering mounts, etc. TIG welded round joints. Frame is blasted, epoxy primed and painted single stage color of choice.
- Restored GM/Alcoa aluminum front steering knuckles, lower control arms (blasted, epoxy primed and painted single stage color of choice).
- Manufactured upper control arms – fully adjustable.
- Restored GM/Alcoa aluminum rear bearing supports (blasted, epoxy primed and painted single stage color of choice).
- Restored GM outer axle shafts. Black oxide plated.
- New front and rear wheel bearings.
- New upper and lower ball joints.
- New power rack and pinion.
- New steering column with tilt, turn signals, hazards, removable hub with wheel.
- New steering shafts, u-joints and supports.
- New adjustable strut rods.
- New rear toe control.
- Custom trailing arms.
- Custom rear shock push rods.
- Custom cantilever shock mechanisms.
- QA-1 coilover shocks and springs, 350 front, 400 rear.
- Custom AFCO radiator and radiator mounts. Derale or Spal fan and shroud.
- Stainless steel engine mounts with poly bushings. Mount to side of block. Provided for SBC, BBC or LS series engines.
- Custom alloy fuel tank with quick fill and Monza style cap on body.
- AN braided fuel line, return line, vent line.
- Wilwood 3 pedal assembly – custom throttle mount for GM style drive-by-wire if using LS engine.
- Wilwood master cylinders and reservoirs. Fittings, stop light switch, flex lines to bulkhead installed.
- Stainless Steel brake lines. Flex lines at each wheel.
- Lokar parking brake handle and cables.
- Winter’s Performance Products Championship Independent 10” ring gear differential with 4.10:1 ratio and Track-diff posi (non-quickchange).
- New custom steel halfshafts with sealed u-joints.
- New custom ‘H’- yoke drive shaft with slip yoke and trans mount for Tremec T-56 Magnum 6-speed transmission.
- Wilwood 6 piston front calipers and drilled and slotted rotors. (red, black or silver).
- Wildwood 4 piston rear calipers and drilled and slotted rotors. Wilwood parking brake caliper. (red, black or silver). Wilwood CNC alloy caliper mounts.
- Front DOT laminated front windshield installed with weatherstrip.
- Rear smoked optically clear acrylic window installed with weatherstrip.
- Hand laid fiberglass body.
- Hand laid fiberglass bonnet (hood).
- Inner spars bonded to hood. Hood is hinged to chassis with gas rods installed.
- Rear inner wheel tubs are bonded into main body.
- Inner door step plates are bonded into main body.
- Fiberglass dash trimmed and installed.
- Inner door is trimmed to fit main body and mounted with CNC alloy gull-wing hinges to rollcage. Gas rods installed for doors.
- Outer doors are provided but not trimmed or bonded to inner doors. (for installation of latches by client).
- Two Kirkey alloy vintage bucket seats with custom seat mounts and installed in car.
- American Racing torque thrust style wheels with grey centers and custom Cheetah Evolution logo caps. 17 x 9 front, 17 x 9.5 rear.
- Alloy long lugnuts.
- Nitto NT555 G2 tires, 275/40ZR17 front, 275/50ZR17 rear.
Base price - $55,000
Any additions or substitutions will change price.
Any body modifications, fiberglass work will change price.
Body is mounted and shipped in gelcoat.
All suspension, steering, mounting hardware is grade 8 or metric 12.9
All threads are fine and nylocks are used.